1．整機采用計算機控制，整機同時安裝兩組瓦楞輥，實現整體多楞型快速更換無需移出更換，實現更高的生產效率，減輕操作者的勞動強度，換輥時間只需５分鐘。
2．整機采用全液控技術，保證瓦楞高速定型和良好粘合。
3．瓦楞輥采用齒嵌離合器獨立傳動無需鎖緊機構。
4．采用直驅式三點傳動，生產車速更高。
5．該機適合配中、高速瓦楞紙板生產線。
6．采用高壓離心風機，帶有消聲器裝置，噪音低。
7．瓦楞輥直徑Φ310mm、Φ320mm、Φ360mm、Φ430mm，４6０mm特殊合金鋼制造，采用熱處理工藝精密磨削。表面鍍硬鉻處理或噴涂碳化鎢處理。
8．各導紙軸、預熱缸、加*工作表面磨削加工并鍍硬鉻處理。
9．整機潤滑采用高溫油脂潤滑形式，集中潤滑。
10．采用紅外線斷紙傳感器，實現斷紙自動保護；斷紙時壓力輥退出，漿盤退出.
11．上漿量大小的控制分為電動控制和自動控制。
A、根據生產線的車速通過電機達到所需的控漿量。
B、自動時可根據車速的變化由編碼器和PLC自動完成；并有人機界面數值顯示，以保證瓦楞機在變速運轉時所需要的上漿量，確保高質量的單面瓦楞紙的穩定性。
12. 采用高剛性的同一底座，傳動與壓制瓦楞一體化；獨立驅動箱，實現PLC與變頻器的通訊，控制瓦楞機的加、減速達到節約電能并預留生產管理系統通訊接口。
13. 配置噴霧裝置，可任意調節原紙的濕度。
技術參數：
1．      zui高機械速度：180 M/min ~300M/min。
2．      有效寬幅：1400mm~2800mm。
3．      楞型：A，B，C，E，F，BC。
Vacuum Single Facer---The perfect embodiment of European Automatic Technology

Characteristics:

1．Computer control, can install 2 group of corrugated roller at the same time. No need to move to exchange the corrugated roller so it can reduce the operator’s working intensity and increase production efficiency. Time of exchange: 5 minutes.
2．Adopt fully hydraulic control to ensure the well form of corrugated paper.
3．Corrugator roller is connected by gear clutch, independent drive, no need lock device.
4．3 points direct drive, higher speed.
5．Applied to mid and high speed production line.
6．High pressure fan structure with silencer is used to reduce noise.
7．The diameter of corrugating roll is Φ310mm,Φ320mm,Φ360mm,Φ430mm,Φ460mm.The corrugating roll in made of special alloy steel, induction hardened. The roll is polished with heat treatment. Coated with chrome or carbon tungsten.
8．The working surface of each paper-guiding roll, pre-heater and pressure roll is polished and coated with chrome.
9．Lubrication by high temperature grease.
10．Infrared detector assures auto paper-breaking protection. When paper is broken, the press roll and the glue trough will withdraw.
11．Thickness of glue is controlled by the clearance between glue roller and doctor roller, by electyomotion or Automatic.
A、Electromotion: Press the button that controls motor to adjust the clearance, to ensure paste enough glue.
B、Auto-controlling: The encoder and PLC auto-controls according the change of speed. And with inter-face.
12. High rigidity one basement structure, drive with corrugating in mutual ;Independent drive box ,Universal joints help to increase stability. Might be communicate with PLC and transducer, control Accelerate or Decelerate Speed; save poner , reserve I/O of computer management system.
13. Might be equipped sprayer, adjustable base paper humidity.
Technical Parameters：
1．Max. speed：180 M/min ~300M/min。
2．Valid Width：1400mm~2800mm。